Restore Backup

From Wikiagro.com
Revision as of 09:24, 27 January 2009 by Ed (Talk | contribs)

Jump to: navigation, search

{{#customtitle:Restore Backup|Restore Backup}}

1. Create a new project (empty) in order to restore all the layers in the .GIS file.
If you want to work with an existing project, take into account that the restored layers will overwrite the existing ones, therefore, you will lose all the previous information.


2. Click on the option GIS gis Edit 09 01.jpg Backup Tooland then select “Restore Backup”. A window will come up for you to indicate the location of the .GIS file to be restored.


Image:GIS_gis_Edit_09a_01.jpg


3. Click on “Open” and the restoring process will start. During this process, GeoAgro GIS automatically compares the imported layers structures with the predefined ones.
After that, the following window will appear:


Image:GIS_gis_Edit_09a_02.jpg


Layer: Name of all the restored layers.

Structures: Name of the structures that belong to each restored layer.

Assign to the structure: Name of the GeoAgro GIS structure that was automatically assigned as it is exactly the same as the restored layer structure.

Structure to be added: Name of the structure of the layer to be restored which is different to the GeoAgro GIS predefined structure, and because of that it should be added.

Information: Comments and conclusions about structures automatic validation proces.


4. If in the “Information” column you see “Structure found” for all the layers, click on “Accept”. The layers will be restored to the current project and added to the References Panel.

If you are adding layers which belong to groups that do not exist in the current project, they will be also added to the References Panel.


5. If in any case the structures of the layers to be restored are different to the ones predefined by the system, you will have two possibilities:


Image:GIS_gis_Edit_09a_03.jpg


a) Add the structure of the layer to be restored to the existing ones in GeoAgro GIS.
If the structure name is the same as other previously defined by GeoAgro GIS, the system will ask you to change the name.


Image:GIS_gis_Edit_09a_04.jpg


Click on the cell from the “Add Structure” list and enter the new structure name.


Image:GIS_gis_Edit_09a_05.jpg


b) Assign a structure predefined by GeoAgro GIS manually. For this:

1- Select one of the structures from the drop-down list and then click on “View Data Structure”.


Image:GIS_gis_Edit_09a_06.jpg


2- A window will come up showing, at the top, the structure of the layer to be restored and, at the bottom, the structure predefined by the system for you to compare the fields and data types. Take into account that when you assign an existing structure, this must contain all the necessary attributes to fit with the one you are restoring, otherwise you will be likely to lose important information.


Image:GIS_gis_Edit_09a_07.jpg


6. Once you check out all the not found structures, click on “Accept” and all the layers contained in the .GIS will be loaded to the References Panel.


Image:GIS_gis_Edit_09a_08.jpg